YOKOGAWA Daqstation® CX1000/CX2000 Paperless Recorder
Control and Measurement Station
CX defines the next generation in process control by fusing recording, control and networking into a single, compact product.
Ordering Examples:
CX1000-1-0-2: DAQSTATION CX1000 (Embedded loop: 0 loop, Measurement channel: 0 ch)
CX1006-1-1-2: DAQSTATION CX1000 (Embedded loop: 0 loops, Measurement channel: 6 ch)
CX1200-1-2-2: DAQSTATION CX1000 (Embedded loop: 2 loops, Measurement channel: 6 ch)
CX1206-2-0-2: DAQSTATION CX1000 (Embedded loop: 2 loops, Measurement channel: 6 ch)
CX1000-2-1-2: DAQSTATION CX1000 (Embedded loop: 0 loop, Measurement channel: 0 ch)
CX1006-2-2-2: DAQSTATION CX1000 (Embedded loop: 0 loops, Measurement channel: 6 ch)
CX1200-3-2-2: DAQSTATION CX1000 (Embedded loop: 2 loops, Measurement channel: 6 ch)
CX1206-3-0-2: DAQSTATION CX1000 (Embedded loop: 2 loops, Measurement channel: 6 ch)
CX1206-3-1-2: DAQSTATION CX1000 (Embedded loop: 2 loops, Measurement channel: 6 ch)
CX2000-1-0-2: DAQSTATION CX2000 (Embedded loop: 0 loop, Measurement channel: 0 ch)
CX2010-1-1-2: DAQSTATION CX2000 (Embedded loop: 0 loops, Measurement channel: 10 ch)
CX2020-1-2-2: DAQSTATION CX2000 (Embedded loop: 0 loops, Measurement channel: 20 ch)
CX2200-2-0-2: DAQSTATION CX2000 (Embedded loop: 2 loops, Measurement channel: 0 ch)
CX2210-2-1-2: DAQSTATION CX2000 (Embedded loop: 2 loops, Measurement channel: 10 ch)
CX2220-2-2-2: DAQSTATION CX2000 (Embedded loop: 2 loops, Measurement channel: 20 ch)
CX2410-3-0-2: DAQSTATION CX2000 (Embedded loop: 4 loops, Measurement channel: 10 ch)
CX2420-3-1-2: DAQSTATION CX2000 (Embedded loop: 4 loops, Measurement channel: 20 ch)
CX2610-3-2-2: DAQSTATION CX2000 (Embedded loop: 6 loops, Measurement channel: 10 ch)
CX2620-1-0-2: DAQSTATION CX2000 (Embedded loop: 6 loops, Measurement channel: 20 ch)
Options:
/A6: Measurement alarm (6 DO )
/A6R: Measurement alarm (6 DO, 8 DI)
/A4F: Measurement alarm (4 DO, FAIL/memory end detection and output )
/A4FR: Measurement alarm (4 DO, 8 DI, FAIL/memory end detection and output )
/BT1: Batch header function
/CST1: Control-purpose extension DIO (12 DI,12 DO terminals)
/D5: VGA output
/M1: Computation functions (including report functions)
/N2: Three legs isolated RTD
/P1: 24 V DC/AC power supply
/TPS4: 24 V DC transmitter power supply (4 loops)
/PG1: Program control (number of program patterns; 4)
/PG2: Program control (number of program patterns; 30)
Optional Accessories:
Shunt resister (for screw input terminal): 415920, 415921, 415922
3.5-inch floppy disk: 705900
Zip disk: A1053MP
CompactFlash memory card (CF + Adapter): B9968NL
Mounting bracket: B9900BX
Standard Specifications
■ Construction
Angle of mounting: Backward tilt of up to 30°; no tilt is allowed on either side, however.
Thickness of mounting panel: 2 to 26 mm
Material: Case = Steel plate, Bezel = Polycarbonate
Color of coating: Case = Pale cobalt blue (equivalent to DIC 16 edition 102)
Bezel = Light charcoal gray (equivalent to Munsell 10B3.6/0.3)
Front panel: Dust- and drip-proof (compliant to IEC529-IP65, NEMA No. 250 Type 4 [except for icing tests])
■ CONTROL FUNCTIONS
Control mode: Select from three control modes, i.e., single loop, cascade control, and loop control with PV switching.
Note) The control mode is fixed to single loop control for loops 5 and 6.
Control computation functions:
Continuous PID control, relay on/off control, time proportional PID control
■ Setting Ranges of Control Parameters
Proportional band: 0.1 to 999.9%
Integral time: 0 to 6000 sec
Derivative time: 0 to 6000 sec
On-off control hysteresis wideth: 0.0 to 100.0% of measurement range
Preset output value: -5.0 to 105.0% of output
(Provided in case of control computation being stopped, PV input being in a burnout state, or instrument input being abnormal)
Output limiter: Setting range: -5.0 to 105.0% for both high/low limits
Shutdown function: Can provide a manipulated output of up to 0 mA when in manual mode operation with 4–20 mA output (shuts down the output for values smaller than -5.1%).
Output rate-of-change limiter: Off, or a value from 0.1 to 100.0%/sec
ALARM FUNCTIONS
■ Control Alarm
Types of control alarm: PV high limit, PV low limit, high limit of deviation, low limit of deviation, deviation within high and low limits, SP high limit, SP low limit, OUT high limit, and OUT low limit
Other alarm type: Fault diagnosis, fail output
Stand-by action: Turns off PV/SP alarm from starting control until steady condition
Alarm output: 6 points/ 2 loops (transistor output 4 points, relay output 2 points)
Alarm setting: 4 types/ loop
Hysteresis: Can set each alarm setting
Display: The status is shown in the digital display in case of alarm. A common alarm
indication is also displayed. The alarm behavior: non-hold or hold-type can be selectable for common to all channels
■ Measurement Alarm
Types of alarm: High limit, low limit, differential high limit, differential low limit, high limit of rate-ofchange,
low limits of rate-of-change, high limit of delay, and low limits of delay (alarm delay)
Alarm delay time: 1 to 3600 sec (1 hr)
Time interval of rate-of-change alarm: Measuring interval × 1 to 15
Alarm output: 6 points (option) *alarm output can be assigned to control output
Number of setting: Max. 4/ each channel
Hysteresis: ON (0.5% of span)/ OFF selectable (common to all channels and all levels)
Display: The status is shown in the digital display in case of alarm. A common alarm indication is also displayed. The alarm behavior: non-hold or hold-type can be selectable or common to all channels
INPUT SECTION
■ Specifications Common to Control and Measurement Inputs
Thermocouple burnout:Switchable between ON/OFF options of detection on a channel basis.
Switchable between burnout upscale/downscale options
Integral time of Select from the options of 20 ms (50 Hz), 16.7 ms (60 Hz) and AUTO
A/D converter: (automatic switching between 20 ms and 16.7 ms depending on the power supply frequency).
■ Control Input
Input interval: 250, 500 or 1000 ms, synchronized with the control period
Input type: DC voltage (DCV), thermocouple (TC), resistance temperature detector (RTD),
DC current (DCA) with external shunt resistor
YOKOGAWA CX1000 Paperless Recorder
YOKOGAWA CX1006 Paperless Recorder
YOKOGAWA CX1200 Paperless Recorder
YOKOGAWA CX1206 Paperless Recorder
YOKOGAWA CX2000 Paperless Recorder
YOKOGAWA CX2010 Paperless Recorder
YOKOGAWA CX2020 Paperless Recorder
YOKOGAWA CX2200 Paperless Recorder
YOKOGAWA CX2210 Paperless Recorder
YOKOGAWA CX2220 Paperless Recorder
YOKOGAWA CX2410 Paperless Recorder
YOKOGAWA CX2420 Paperless Recorder
YOKOGAWA CX2610 Paperless Recorder
YOKOGAWA CX2620 Paperless Recorder
