| |
|
ARS15B |
YOKOGAWA ARS15B 32 Solid State Inputs (SSR Built-In Type, M4 Terminals)
YOKOGAWA Relay Boards (for FIO):
ARM15A, ARM55D, ARM55W, ARM55T, ARM55C, ARS15B, ARS15M, ARS55M
GENERAL
This document describes the specifications of relay board used in FIO subsystem of CENTUM VP. Relay input/ output boards are connected in between digital input/output modules (for FIO) and field devices. Relay input boards receive contact signals or voltage input signals of field devices. Relay output boards receive output signals of the digital output module and amplify by the relay, and then output to field devices. These relay boards support dual- redundant digital input/output modules (for FIO).
MODELS AND SUFFIX CODES
Solid State Relay Board
|
|
|
Description |
|
Model |
ARS15B |
32 Solid State Inputs (SSR Built-In Type, M4 Terminals) |
|
Suffix Codes |
-5 |
For 48 V DC input |
|
-6 |
110 V DC input |
|
0 |
19-inch Rack Mountable |
|
0 |
Basic Type |
|
Option Code |
/BR3 |
Wall Mount Bracket |
Ordering Examples:
ARS15B-500
ARS15B-600
ARS15B-500/BR3
ARS15B-600/BR3
Old Ordering Examples:
ARS15B-000
ARS15B-100
ARS15B-000/BR3
ARS15B-100/BR3
Solid State Relay Boards (Contact Input)
|
Models |
ARS15B-5 (48 V DC), ARS15B-6 (110 V DC) |
|
Usage |
Solid State Relay Contact Input (Single / Dual-redundant) |
|
Contact Points |
32-point |
|
Terminals for Field Device Connection |
M4 screws |
|
Modules |
ADV151 (DI: 32-point) + ATD5A (Terminal block) ADV161 (DI: 64-point) (*1) |
|
Signal Cables |
AKB331 (for 32-point) AKB337 (for 64-point) |
|
Contact Input Signal |
ON signal: 200 Ω or less
OFF signal: At least 200 kΩ |
|
External Contact Rating |
ARS15B-5 (48 V DC): At least 60 V DC, 20 mA ARS15B-6 (110 V DC): At least 140 V DC, 20 mA |
|
Power Supply Voltage and Current
Consumption of Internal Circuit
(require external power supply) |
24 V DC Max. 0.32 A |
|
Power Supply for Field Device
(require external power supply) |
Dual-line (supply power per 32-point)
ARS15B-5 (48 V DC): 48 V DC; Max. 0.5 A per one line
ARS15B-6 (110 V DC): 110 V DC; Max. 0.4 A per one line |
|
Insulation Resistance |
At least 10 MΩ (500 V DC) |
|
Withstanding Voltage |
Between field device terminals and cases: 2 kV Between 24 V power terminals and cases: 500 V
Between 24 V power terminals and field device terminals: 2 kV |
|
Ambient Temperature and Humidity |
0 to 50 °C, 10 to 90 %RH |
|
Standards |
Safety standard [CSA] (*2), EMC standards [CE Marking], [C-Tick Marking],
[KC Marking] |
|
Size |
W: 482.6 mm x H: 132.5 mm (3U) |
|
Weight |
2.5 kg | |
|
