YOKOGAWA LL50A Parameter Setting Software
with Ladder Program Building Function and Network Profile Creating Function
■General
The LL50A Parameters Setting Software is designed to build and set parameters, ladder programs, and the like of the UTAdvanced digital indicating controllers from a PC. The tuning and monitoring of ladder programs are possible during communication with the controllers.
- Parameter Setting Function
- Tuning Function
- Ladder Program Building Function
- Network Profile Creating Function
■Applicable Controllers
UT75A digital indicating controller
UT55A digital indicating controller
UT52A digital indicating controller
UT35A digital indicating controller
UT32A digital indicating controller
UP55A program controller
UP35A program controller
UM33A digital indicator with alarms
■ Model and Suffix Codes
Model Suffix code Description
|
Model |
Suffix Code |
Description |
|
LL50A |
-00 |
Parameter Setting Software with Ladder Program Building Function |
Ordering Example:
YOKOGAWA LL50A-00 PC-Based Custom Computation Building Tool
Package Items
CDs: Two LL50A software/USB conversion driver
LL50A User’s Manual LL50A
Installation Manual: One
Dedicated cable and dedicated adapter: One
Main Features
A Variety of Connection Methods In addition to a connection with a Light Loader (dedicat- ed) adapter, connections with a communication terminal on the rear panel and a dedicated cable are available. As for the connection with a dedicated cable, settings can be made when the controller power is not energized.
Parameter Setting Function This function allows for setting and changing the pa- rameters of the controller. In case of the UT75A, allows for setting the program pattern.
Program Pattern Setting This function allows for setting the program pattern. (UP55A, UP35A only) 30 program patterns for UP55A and max. 4 program patterns for UP35A.
Tuning Function This function allows for adjusting the PID parameters while watching the PV, SP, and OUT trend graphs. (Except UM33A)
Ladder Program Building Function This function allows for building the input and output signal sequences of the controller using the ladder program. Various calculations are possible using basic and application commands. (Except UM33A)
Network Profile Creating Function This function creates an Electronic Device Data Sheet for PROFIBUS-DP communication. (UT75A, UT55A, UT35A, UP55A and UP35A only)
